ade
Forum Member
Posts: 319
|
Post by ade on Feb 13, 2011 12:26:14 GMT
Apologies if this has already been covered. Point me in the right direction if it has.
I have an uncut Guideline Power Taper DDC connect #10/11 to go on a 16ft Bruce & Walker Powerlite #11. Uncut it weighs 45g
Can anyone suggest a weight in grams or grains for this setup please, would I be looking to use the full line on this rod? I'm not by a river for a couple of weeks and want to get it something like before I go.
Thanks
Ade
|
|
|
Post by underghillie on Feb 13, 2011 12:30:38 GMT
Ade, I would say you will be ok with the line uncut, i have used the uncut heads on the B&W Norway's 15 and 16 footers and they work fine
|
|
|
Post by stinger on Feb 13, 2011 12:41:30 GMT
Ade, I would say you will be ok with the line uncut, i have used the uncut heads on the B&W Norway's 15 and 16 footers and they work fine Aye, but you could cast a washing line out of Poundstretchers ;D ;D ;D
|
|
ade
Forum Member
Posts: 319
|
Post by ade on Feb 13, 2011 14:10:42 GMT
Thanks Tony
|
|